alt=Saponification reaction of a triglyceride|thumb|465x465px|Example of [[saponification reaction of a triglyceride molecule (left) with potassium hydroxide (KOH) yielding glycerol (purple) and salts of fatty acids (soap).]]
Saponification value or saponification number (SV or SN) represents the number of milligrams of potassium hydroxide (KOH) or sodium hydroxide (NaOH) required to saponify one gram of fat under the conditions specified. It is a measure of the average molecular weight (or chain length) of all the fatty acids present in the sample in form of triglycerides. The higher the saponification value, the lower the fatty acids average length, the lighter the mean molecular weight of triglycerides and vice versa. Practically, fats or oils with high saponification value (such as coconut and palm oil) are more suitable for soap making.
Determination
To determine saponification value, the sample is treated with an excess of alkali (usually an ethanolic solution of potassium hydroxide) for half an hour under reflux. The KOH is consumed by reaction with triglycerides, which consume three equivalents of base. Diglycerides consume two equivalents of KOH. Monoglycerides and free fatty acids, as well as other esters such as lactones, consume one equivalent of base.
Handmade soap makers who aim for bar soap use sodium hydroxide (NaOH), commonly known as lye, rather than KOH (caustic potash) which produces soft paste, gel or liquid soaps. In order to calculate the lye amount needed to make bar soap, KOH values of SV can be converted to NaOH values by dividing KOH values by the ratio of the molecular weights of KOH and NaOH (1.403).
Calculation of average molecular weight of fats and oils
The theoretical SV of a pure triglyceride molecule can be calculated by the following equation (where MW is its molecular weight):
:where:
:3 is the number of fatty acids residues per triglyceride
:1000 is the conversion factor for milligrams to grams
:56.1 is the molar mass of KOH. In comparison, trilaurin with three shorter fatty acid residues (lauric acid) has a MW of 639 and an SV of 263.
As it can be seen from equation (2), the SV of a given fat is inversely proportional to its molecular weight. Actually, as fats and oils contain a mix of different triglycerides species, the average MW can be calculated according to the following relation:
Unsaponifiables <span class="anchor" id="Unsaponifiables"></span>
<!-- This Anchor tag serves to provide a permanent target for incoming section links. Please do not remove it, nor modify it, except to add another appropriate anchor. If you modify the section title, please anchor the old title. It is always best to anchor an old section header that has been changed so that links to it will not be broken. See Template:Anchor for details. This text is produced using -->
Unsaponifiables are components of a fatty substance (oil, fat, wax) that fail to form soaps when treated with alkali and remain insoluble in water but soluble in organic solvents. For instance, typical soybean oil contains, by weight, 1.5 – 2.5% of unsaponifiable matter. Unsaponifiables include nonvolatile components : alkanes, sterols, triterpenes, fatty alcohols, tocopherols and carotenoids as well as those that mainly result from the saponification of fatty esters (sterols esters, wax esters, tocopherols esters, ...). This fraction may also contain environmental contaminants and residues of plasticizers, pesticides, mineral oil hydrocarbons and aromatics.
Unsaponifiable constituents are an important consideration when selecting oil mixtures for the manufacture of soaps. Unsaponifiables can be beneficial to a soap formula because they may have properties such as moisturization, conditioning, antioxidant, texturing etc. On the other hand, when proportion of unsaponifiables is too high (> 3%), or the specific unsaponifiables present do not provide significant benefits, a defective or inferior soap product can result. For example, shark oil is not suitable for soap making as it may contain more than 10% of unsaponifiable matter.
For edible oils, the tolerated limit of unsaponifiable matter is 1.5% (olive, refined soybean), while inferior quality crude or pomace oil could reach 3%.
Determination of unsaponifiables involves a saponification step of the sample followed by extraction of the unsaponifiable using an organic solvent (i.e. diethyl ether). Official methods for animal and vegetable fats and oils are described by ASTM D1065 - 18, ISO 3596: 2000 or 18609: 2000, AOCS method Ca 6a-40.
Saponification values and unsaponifiables of various oils and fats
{| class="wikitable sortable"
! Fat / oil
! Saponification value (mg KOH / g sample)
! Unsaponifiable matter (%)
|-
|Beeswax
| – 102
|>
|-
|Canola oil
| – 193
|<
|-
|Cocoa butter
| – 200
| – 1
|-
|Coconut oil
| – 265
| – 1.4
|-
|Corn oil
| – 195
| – 3
|-
|Cottonseed oil
| – 207
|<
|-
|Fish oil
| – 200
| – 3
|-
|Lanolin
| – 127
| – 50
|-
|Lard
| – 203
|<
|-
|Linseed oil
| – 196
| – 2
|-
|Mineral oil
|
|
|-
|Olive oil
| – 196
| – 1.1
|-
|Palm kernel oil
| – 254
|<
|-
|Palm oil
| – 209
|<
|-
|Peanut oil
| – 196
| – 4.4
|-
|Rapeseed oil
| – 181
| – 1.1
|-
|Safflower oil
| – 194
|<
|-
|Shea butter
| – 190
| – 17
|-
|Soybean oil
| – 195
| – 2.5
|-
|Sunflower oil
| – 195
| – 1.2
|-
|Whale oil
| – 202
|<
|}
See also
- Ester value – Determination of the amount of ester present in fats and oils
- Soapmaking – Small scale process of producing soap