A good's price elasticity of demand (<math>E_d</math>, PED) is a measure of how sensitive the quantity demanded is to its price. When the price rises, quantity demanded falls for almost any good (law of demand), but it falls more for some than for others. The price elasticity gives the percentage change in quantity demanded when there is a one percent increase in price, holding everything else constant. If the elasticity is −2, that means a one percent price rise leads to a two percent decline in quantity demanded. Other elasticities measure how the quantity demanded changes with other variables (e.g. the income elasticity of demand for consumer income changes).

Price elasticities are negative except in special cases. If a good is said to have an elasticity of 2, it almost always means that the good has an elasticity of −2 according to the formal definition. The phrase "more elastic" means that a good's elasticity has greater magnitude, ignoring the sign. Veblen and Giffen goods are two classes of goods which have positive elasticity, rare exceptions to the law of demand. Demand for a good is said to be inelastic when the elasticity is less than one in absolute value: that is, changes in price have a relatively small effect on the quantity demanded. Demand for a good is said to be elastic when the elasticity is greater than one. A good with an elasticity of −2 has elastic demand because quantity demanded falls twice as much as the price increase; an elasticity of −0.5 has inelastic demand because the change in quantity demanded is half of the price increase.

At an elasticity of 0 consumption would not change at all, in spite of any price increases.

Revenue is maximized when price is set so that the elasticity is exactly one. The good's elasticity can be used to predict the incidence (or "burden") of a tax on that good. Various research methods are used to determine price elasticity, including test markets, analysis of historical sales data and conjoint analysis.

Definition

The variation in demand in response to a variation in price is called price elasticity of demand. It may also be defined as the ratio of the percentage change in quantity demanded to the percentage change in price of particular commodity. The formula for the coefficient of price elasticity of demand for a good is:

:<math>E_{\langle P \rangle} = \frac{\Delta Q/Q}{\Delta P/P}</math>

where <math>P</math> is the initial price of the good demanded, <math>\Delta P</math> is how much it changed, <math>Q</math> is the initial quantity of the good demanded, and <math>\Delta Q</math> is how much it changed. In other words, we can say that the price elasticity of demand is the percentage change in demand for a commodity due to a given percentage change in the price. If the quantity demanded falls 20 tons from an initial 200 tons after the price rises $5 from an initial price of $100, then the quantity demanded has fallen 10% and the price has risen 5%, so the elasticity is (−10%)/(+5%) = −2.

The price elasticity of demand is ordinarily negative because quantity demanded falls when price rises, as described by the "law of demand". Since the price elasticity of demand is negative for the vast majority of goods and services (unlike most other elasticities, which take both positive and negative values depending on the good), economists often leave off the word "negative" or the minus sign and refer to the price elasticity of demand as a positive value (i.e., in absolute value terms). If a 1% rise in the price of gasoline causes a 0.5% fall in the quantity of cars demanded, the cross-price elasticity is <math>E^d_{cg} = (-0.5%)/(+1%) = -0.5.</math>

As the size of the price change gets bigger, the elasticity definition becomes less reliable for a combination of two reasons. First, a good's elasticity is not necessarily constant; it varies at different points along the demand curve because a 1% change in price has a quantity effect that may depend on whether the initial price is high or low. Contrary to common misconception, the price elasticity is not constant even along a linear demand curve, but rather varies along the curve. A linear demand curve's slope is constant, to be sure, but the elasticity can change even if <math>\Delta P/\Delta Q</math> is constant. There does exist a nonlinear shape of demand curve along which the elasticity is constant: <math>P = aQ^{1/E}</math>, where <math>a</math> is a shift constant and <math>E</math> is the elasticity.

Second, percentage changes are not symmetric; instead, the percentage change between any two values depends on which one is chosen as the starting value and which as the ending value. For example, suppose that when the price rises from $10 to $16, the quantity falls from 100 units to 80. This is a price increase of 60% and a quantity decline of 20%, an elasticity of <math>(-20%)/(+60%) \approx -0.33 </math> for that part of the demand curve. If the price falls from $16 to $10 and the quantity rises from 80 units to 100, however, the price decline is 37.5% and the quantity gain is 25%, an elasticity of <math>(+25%)/(-37.5%) = -0.67 </math> for the same part of the curve. This is an example of the index number problem.

Two refinements of the definition of elasticity are used to deal with these shortcomings of the basic elasticity formula: arc elasticity and point elasticity.

Arc elasticity

Arc elasticity was introduced very early on by Hugh Dalton. It is very similar to an ordinary elasticity problem, but it adds in the index number problem. A second solution to the asymmetry problem of having an elasticity dependent on which of the two given points on a demand curve is chosen as the "original" point and which as the "new" one is Arc Elasticity, which is to compute the percentage change in P and Q relative to the average of the two prices and the average of the two quantities, rather than just the change relative to one point or the other. Loosely speaking, this gives an "average" elasticity for the section of the actual demand curve—i.e., the arc of the curve—between the two points. As a result, this measure is known as the arc elasticity, in this case with respect to the price of the good. The arc elasticity is defined mathematically as:

:<math>E_d = \frac{ \left(\frac{P_1 + P_2}2\right) }{\left( \frac{Q_{d_1} + Q_{d_2 2 \right)}\times\frac{\Delta Q_d}{\Delta P} = \frac{P_1 + P_2}{Q_{d_1} + Q_{d_2\times\frac{\Delta Q_d}{\Delta P}</math>

This method for computing the price elasticity is also known as the "midpoints formula", because the average price and average quantity are the coordinates of the midpoint of the straight line between the two given points.

Point elasticity

In order to avoid the accuracy problem described above, the difference between the starting and ending prices and quantities should be minimised. This is the approach taken in the definition of point elasticity, which uses differential calculus to calculate the elasticity for an infinitesimal change in price and quantity at any given point on the demand curve:

:<math>E_d = \frac{\mathrm{d}Q_d}{\mathrm{d}P} \times \frac{P}{Q_d}</math>

In other words, it is equal to the absolute value of the first derivative of quantity with respect to price <math>\frac{\mathrm{d}Q_d}{\mathrm{d}P}</math> multiplied by the point's price (P) divided by its quantity (Q<sub>d</sub>). However, the point elasticity can be computed only if the formula for the demand function, <math>Q_d = f(P)</math>, is known so its derivative with respect to price, <math>{dQ_d/dP}</math>, can be determined.

In terms of partial-differential calculus, point elasticity of demand can be defined as follows: let <math>\displaystyle x(p,w)</math> be the demand of goods <math>x_1,x_2,\dots,x_L</math> as a function of parameters price and wealth, and let <math>\displaystyle x_\ell(p,w)</math> be the demand for good <math>\displaystyle\ell</math>. The elasticity of demand for good <math>\displaystyle x_\ell(p,w)</math> with respect to price <math>p_k</math> is

:<math>E_{x_\ell,p_k} = \frac{\partial x_\ell(p,w)}{\partial p_k}\cdot\frac{p_k}{x_\ell(p,w)} = \frac{\partial \log x_\ell(p,w)}{\partial \log p_k}</math>

History

thumb|right|The illustration that accompanied Marshall's original definition of elasticity, the ratio of PT to Pt

Together with the concept of an economic "elasticity" coefficient, Alfred Marshall is credited with defining "elasticity of demand" in Principles of Economics, published in 1890. Alfred Marshall invented price elasticity of demand only four years after he had invented the concept of elasticity. He used Cournot's basic creating of the demand curve to get the equation for price elasticity of demand. He described price elasticity of demand as thus: "And we may say generally:— the elasticity (or responsiveness) of demand in a market is great or small according as the amount demanded increases much or little for a given fall in price, and diminishes much or little for a given rise in price". He reasons this since "the only universal law as to a person's desire for a commodity is that it diminishes ... but this diminution may be slow or rapid. If it is slow... a small fall in price will cause a comparatively large increase in his purchases. But if it is rapid, a small fall in price will cause only a very small increase in his purchases. In the former case... the elasticity of his wants, we may say, is great. In the latter case... the elasticity of his demand is small." Mathematically, the Marshallian PED was based on a point-price definition, using differential calculus to calculate elasticities.

Determinants

The overriding factor in determining the elasticity is the willingness and ability of consumers after a price change to postpone immediate consumption decisions concerning the good and to search for substitutes ("wait and look"). A number of factors can thus affect the elasticity of demand for a good:

  • Availability of substitute goods: The more and closer the substitutes available, the higher the elasticity is likely to be, as people can easily switch from one good to another if an even minor price change is made; There is a strong substitution effect. If no close substitutes are available, the substitution effect will be small and the demand inelastic. Specific foodstuffs (ice cream, meat, spinach) or families of them (dairy, meat, sea products) may be more elastic.
  • Necessity: The more necessary a good is, the lower the elasticity, as people will attempt to buy it no matter the price, such as the case of insulin for those who need it.
  • Who pays: Where the purchaser does not directly pay for the good they consume, such as with corporate expense accounts, demand is likely to be more inelastic. When the goods represent only a negligible portion of the budget, the income effect is insignificant and does not contribute substantially to elasticity.

Effect on entire revenue

right|thumb|A set of graphs shows the relationship between demand and revenue (PQ) for the specific case of a linear demand curve. As price decreases in the elastic range, the revenue increases, but in the inelastic range, revenue falls. Revenue is highest at the quantity where the elasticity equals 1.

A firm considering a price change must know what effect the change in price will have on total revenue. Revenue is simply the product of unit price times quantity:

:<math> \text{Revenue} = PQ_d</math>

Generally, any change in price will have two effects:

The price effect

For inelastic goods, an increase in unit price will tend to increase revenue, while a decrease in price will tend to decrease revenue. (The effect is reversed for elastic goods.)

The quantity effect

An increase in unit price will tend to lead to fewer units sold, while a decrease in unit price will tend to lead to more units sold.

For inelastic goods, because of the inverse nature of the relationship between price and quantity demanded (i.e., the law of demand), the two effects affect total revenue in opposite directions. But in determining whether to increase or decrease prices, a firm needs to know what the net effect will be. Elasticity provides the answer: The percentage change in total revenue is approximately equal to the percentage change in quantity demanded plus the percentage change in price. (One change will be positive, the other negative.) The percentage change in quantity is related to the percentage change in price by elasticity: hence the percentage change in revenue can be calculated by knowing the elasticity and the percentage change in price alone.

As a result, the relationship between elasticity and revenue can be described for any good:

  • When the price elasticity of demand for a good is perfectly inelastic (E<sub>d</sub> = 0), changes in the price do not affect the quantity demanded for the good; raising prices will always cause total revenue to increase. Goods necessary to survival can be classified here; a rational person will be willing to pay anything for a good if the alternative is death. For example, a person in the desert weak and dying of thirst would easily give all the money in his wallet, no matter how much, for a bottle of water if he would otherwise die. His demand is not contingent on the price.
  • When the price elasticity of demand is relatively inelastic (−1 < E<sub>d</sub> < 0), the percentage change in quantity demanded is smaller than that in price. Hence, when the price is raised, the total revenue increases, and vice versa.
  • When the price elasticity of demand is unit (or unitary) elastic (E<sub>d</sub> = −1), the percentage change in quantity demanded is equal to that in price, so a change in price will not affect total revenue.
  • When the price elasticity of demand is relatively elastic (−∞ < E<sub>d</sub> < −1), the percentage change in quantity demanded is greater than that in price. Hence, when the price is raised, the total revenue falls, and vice versa.
  • When the price elasticity of demand is perfectly elastic (E<sub>d</sub> is − ∞), any increase in the price, no matter how small, will cause the quantity demanded for the good to drop to zero. Hence, when the price is raised, the total revenue falls to zero. This situation is typical for goods that have their value defined by law (such as fiat currency); if a five-dollar bill were sold for anything more than five dollars, nobody would buy it [unless there is demand for economical jokes], so demand is zero (assuming that the bill does not have a misprint or something else which would cause it to have its own inherent value).

Hence, as the accompanying diagram shows, total revenue is maximized at the combination of price and quantity demanded where the elasticity of demand is unitary.

In practice, demand is likely to be only relatively elastic or relatively inelastic, that is, somewhere between the extreme cases of perfect elasticity or inelasticity. More generally, then, the higher the elasticity of demand compared to PES, the heavier the burden on producers; conversely, the more inelastic the demand compared to supply, the heavier the burden on consumers. The general principle is that the party (i.e., consumers or producers) that has fewer opportunities to avoid the tax by switching to alternatives will bear the greater proportion of the tax burden. or several products.

Limitations of revenue-maximizing strategies

In most situations, such as those with nonzero variable costs, revenue-maximizing prices are not profit-maximizing prices. For these situations, using a technique for Profit maximization is more appropriate.

Selected price elasticities

Various research methods are used to calculate the price elasticities in real life, including analysis of historic sales data, both public and private, and use of present-day surveys of customers' preferences to build up test markets capable of modelling such changes. Alternatively, conjoint analysis (a ranking of users' preferences which can then be statistically analysed) may be used. Approximate estimates of price elasticity can be calculated from the income elasticity of demand, under conditions of preference independence. This approach has been empirically validated using bundles of goods (e.g. food, healthcare, education, recreation, etc.).

Though elasticities for most demand schedules vary depending on price, they can be modeled assuming constant elasticity. Using this method, the elasticities for various goods—intended to act as examples of the theory described above—are as follows. For suggestions on why these goods and services may have the elasticity shown, see the above section on determinants of price elasticity.

  • Cigarettes (US)
  • −0.3 to −0.6 (general)
  • −0.6 to −0.7 (youth)
  • Alcoholic beverages (US)
  • −0.3 or −0.7 to −0.9 as of 1972 (beer)
  • −1.0 (wine)
  • −1.5 (spirits)
  • Airline travel (US)
  • −0.3 (first class)
  • −0.9 (discount)
  • −1.5 (for pleasure travelers)
  • Livestock
  • −0.5 to −0.6 (broiler chickens)
  • Oil (World)
  • −0.4
  • Car fuel
  • −0.09 (short run)
  • −0.31 (long run)
  • −0.085 to −0.13 (non-linear with price change in the <br />short-run for Saudi Arabia in 2013}
  • Cinema visits (US)
  • −0.87 (general)
  • Medicine (US)
  • −0.31 (medical insurance)
  • −0.03 to −0.06 (pediatric visits)
  • Patents
  • −0.45
  • Rice
  • −0.47 (Austria)
  • −0.8 (Bangladesh)
  • −0.8 (China)
  • −0.25 (Japan)
  • −0.55 (US)
  • Trademarks
  • −0.25 to −0.40 (international market)
  • Transport
  • −0.20 (bus travel US)
  • −0.52 (commuter parking)
  • Cannabis (US)
  • −0.655
  • Soft drinks
  • −0.8 to −1.0 (general)
  • −3.8 (Coca-Cola)
  • −4.4 (Mountain Dew)
  • Telecommunications
  • −0.405 (mobile)
  • −0.434 (broadband)
  • Eggs
  • −0.1 (US: household only)
  • −0.35 (Canada)
  • −0.55 (South Africa)
  • Golf
  • −0.3 to −0.7

See also

Notes

References

  • A Lesson on Elasticity in Four Parts, Youtube, Jodi Beggs
  • Price Elasticity Models and Optimization
  • Approx. PED of Various Products (U.S.)
  • Approx. PED of Various Home-Consumed Foods (U.K.)