thumb|An overdrive is sometimes a separate unit that fits into the back of a gearbox, as with this [[Fairey Aviation|Fairey unit. A plate warns to only engage the unit in third and fourth gears.]]

thumb|1960s [[Triumph Motor Company|Triumph gearbox with Laycock de Normanville electro-hydraulic operated overdrive]]

thumb|Laycock de Normanville "J type" overdrive unit

An overdrive is mechanical unit containing epicyclic gears sized to allow an automobile to cruise at a sustained speed with reduced engine speed (rpm), leading to improved fuel consumption and reduced wear and noise level. The term is ambiguous. and manufactured by the English company Laycock Engineering (later GKN Laycock), at its Little London Road site in Sheffield. The system devised by de Normanville was adopted and manufactured by Laycock after his chance meeting with a Laycock Products Engineer. De Normanville overdrives were found in vehicles manufactured by Standard-Triumph, who were first, followed by Ford, BMC and British Leyland, Jaguar, Rootes Group and Volvo to name only a few. Another British company, the former aircraft builder Fairey, built a successful all-mechanical unit for the Land Rover, which is still in production in America today.

The first production vehicle to feature the Laycock system was the 1948 Standard Vanguard Saloon. The first unit to be created was the A-type overdrive, which was fitted to many sports cars during the 1950s, and into the late 1960s. Several famous marques used A-type overdrives, including Jaguar, Aston Martin, Ferrari, Austin-Healey, Jensen, Bristol, AC, Armstrong Siddeley and Triumph's TR sports car range, from the TR2 through to the end of the 1972 model year of the TR6.

In 1959, the Laycock Engineering Company introduced the D-type overdrive, which was fitted to a variety of motor cars including Volvo 120 and 1800s, Sunbeam Alpines and Rapiers, Triumph Spitfires, and also 1962–1967 MGBs (those with 3-synchro transmissions).

From 1967 the LH-type overdrive was introduced, and this featured in a variety of models, including 1968–1980 MGBs, the MGC, the Ford Zephyr, early Reliant Scimitars, TVRs, and Gilberns.

The J-type overdrive was introduced in the late 1960s, and was adapted to fit Volvo, Triumph, Vauxhall/Opel, American Motors and Chrysler motorcars, and Ford Transit vans.

The P-type overdrive marked the last updates and was manufactured in a Gear Vendors U.S. version and a Volvo version. The Volvo version kept the same package size as the J-type but with the updated 18 element freewheel and stronger splines through the planet carrier. The Gear Vendors U.S. version uses a larger 1.375 outer diameter output shaft for higher capacity and a longer rear case.

Over a period of 40 years, Laycock Engineering manufactured over three and a half million overdrive Units, and over one million of these were fitted to Volvo motorcars.

In 2008 the U.S. company Gear Vendors, Inc. of El Cajon, California purchased all the overdrive assets of GKN to continue production of the U.S. version and all spares for J and P types worldwide.

The system features an oil pressure operated device attached to the back of the standard gearbox operating on the gearbox output shaft. Through a system of oil pressure, solenoids and pistons, the overdrive would drop the revs on whatever gears it was used on by 22% (.778). For instance, the overdrive system applied to a Triumph TR5 operates on 2nd, 3rd and top gear. When engaged, the overdrive would drop the revs from 3000 by 666 RPM, or from 3500 the drop would be 777 RPM to 2723 net. The advantages this reduced rpm had on fuel consumption was most often quite near 22% decrease during highway driving.

In North America

In the days before automatic transmissions were common, especially in the 1950s, many rear-wheel drive American cars were available with an overdrive option. With substantial improvements developed in Muncie, Indiana, by William B. Barnes for production by its Warner Gear Division, BorgWarner provided the box that was factory-installed between the transmission and a foreshortened driveshaft. Since the overdrive function, if enabled, could be shifted by simply easing up on the accelerator without depressing the clutch pedal, the action was much like a semi-automatic. Also, an electrically operated solenoid would deactivate the unit via a switch under the accelerator pedal providing the equivalent of the kickdown of the automatic. A knob connected to a bowden cable, similar to some emergency brake applications, was also provided to lock out the unit mechanically. Using overdrive with the main 3-speed transmission in 2nd gear was similar in ratio to 3rd gear, and with the main transmission in third, the overall ratio was fractional (i.e., "true overdrive"). This was important in reducing wear, tear, noise, and difficulty in control.

Such add-on overdrive boxes were available from the 1930s to the 1970s for cars and light trucks.

Today, most petrol and diesel cars and trucks Overdrive is included in both automatic and manual transmissions as an extra gear (or two in some cases).

Fuel economy and drivetrain wear

When using overdrive gearing, the car's engine speed drops, reducing wear and normally saving fuel. Since 1981 U.S. corporate average fuel economy (CAFE) legislation, virtually all domestic vehicles have included overdrive to save fuel. One should refer to the car's owner's manual for the proper speed to run at overdrive. All engines have a range of peak efficiency and it is possible for the use of overdrive to keep the engine out of this range for all or part of the time of its use if used at inappropriate speeds, thus cutting into any fuel savings from the lower engine speed.

Overall drivetrain reduction comes down to three basic factors: transmission gearing (including overdrive), differential gearing (in the axle), and tire size. The rotation speed problem comes into effect when the differential gearing is a high ratio and an overdrive is used to compensate. This may create unpleasant vibrations at high speeds and possible destruction of the driveshaft due to the centripetal forces or uneven balance.

The driveshaft is usually a hollow metal tube that requires balancing to reduce vibration and contains no internal bracing.

The higher speeds on the driveshaft and related parts can cause heat and wear problems if an overdrive and high differential gearing (or even very small tires) are combined, and create unnecessary friction. This is especially important because the differential gears are bathed in heavy oil and seldom provided with any cooling besides air blowing over the housing.

The impetus is to minimize overdrive use and provide a higher ratio first gear, which means more gears between the first and the last to keep the engine at its most efficient speed. This is part of the reason that modern automobiles tend to have larger numbers of gears in their transmissions. It is also why more than one overdrive gear is seldom seen in a vehicle except in special circumstances i.e. where high (numerical) differential gear is required to get the vehicle moving as in trucks or performance cars though double overdrive transmissions are common in other vehicles, often with a small number on the axle gear reduction, but usually only engage at speeds exceeding .

Explanatory notes

References

  • "How Automatic Transmissions Work – Overdrive" (interactive animation at How Stuff Works