The is a line of automobiles produced by the Japanese automaker Nissan from 1978 until 2000, when it was replaced by the Nissan Bluebird Sylphy in the Japanese market.
Between 2000 and 2005, the name "Pulsar" has been used in Australia and New Zealand on rebadged versions of the Sylphy. This arrangement continued until the introduction of the Nissan Tiida (C11) in 2005; at this time the Pulsar name was retired. In 2013, Nissan replaced the Tiida in Australia and New Zealand with two new models badged as Pulsar. These were based on the Sylphy (B17) sedan and Tiida (C12) hatchback, the latter also sold in Thailand under the Pulsar name. In 2014, a European-only replacement for the Tiida was introduced using the Pulsar nameplate.
The original Pulsar was a hatchback to be sold exclusively at a different Nissan Japan dealership network called Nissan Cherry Store as a larger five-door hatchback alternative to the Nissan Cherry. Although Pulsar models were front-wheel drive from introduction, Nissan did offer four-wheel drive as an option on select models internationally.
The Pulsar sold in Japan originally served as the intermediate model offered at Nissan dealerships Nissan Cherry Store between the Nissan Violet and the Cherry, while different versions of the Pulsar sold at other Japanese networks served as the base model, with other larger Nissan products. Various Pulsar-based models were exported as international market conditions dictated, sometimes labeled as "Sunny", "Cherry" or "Sentra", while the internationally labeled product was actually a Pulsar and not a Japanese market Sunny or Cherry.
The name "Pulsar" is taken from pulsar (portmanteau of pulsating star), a highly magnetized, rotating neutron star.
N10, N11 (1978)
The N10 model Pulsar, introduced in May 1978, replaced the earlier Cherry F-II internationally, and benefited from the engineering efforts of the Prince Motor Company which developed the Nissan Cherry before the company merged with Nissan in 1966. It retained the rack-and-pinion steering of the Cherry, as well as the independent suspension with coilover struts in front and coil sprung trailing arms at the rear. The Pulsar was a subcompact car to augment the Sunny sedan. The Sunny and the Pulsar ranges were sold at different Nissan Japan dealerships, called Nissan Satio Shop for the Sunny, and Nissan Cherry Shop for the Pulsar.
It retained the Cherry name in Europe and many other export markets, even being sold as the "Cherry Europe" in some markets such as Belgium to separate it from the Cherry F-II which remained on sale for a while. The "Cherry"-badged version was first introduced at the Dutch AutoRAI show in February 1979 and went on sale shortly thereafter. An unusual styling feature for the car was its long nose, which was due to Nissan envisaging that the car would also be built with a longitudinal rear-wheel-drive layout for developing markets; however, only front-wheel-drive models were actually built. At the time of introduction, the Pulsar only had a four-door fastback-styled sedan bodywork, and either a 1.2- or a 1.4-liter engine. This was the first passenger car Nissan assembled in their new Greek plant, where local partner TEOKAR built it with the 1.0 and 1.2-liter engines from 1980 on.
left|thumb|1981-1982 Datsun Cherry DX 5-door (Europe)
thumb|left|1981–1982 Datsun Cherry coupé (Europe)
thumb|left|1979 Datsun Cherry wagon (Europe)
This model was known as the Datsun Cherry or Datsun 100A/120A/130A/140A/150A in Europe and most of Asia, and the Datsun 310 in the US and Canada. It was exported to Australia, New Zealand, South Africa, and Malaysia with the Datsun Pulsar name. It entered the Australian market in October 1980, with the facelift arriving in October 1981. In New Zealand the facelift model was locally assembled from late 1981, effectively replacing the previous generation 100A which was built and sold locally in the mid-1970s. The Datsun Pulsar was also locally assembled in South Africa and in Malaysia by Tan Chong Motor. Some late South African Pulsars use the square Skyline-style head- and taillights from the Langley, including on the well-equipped Pulsar Panache model.
left|thumb|1981-1982 Datsun Pulsar TL 5-door (New Zealand)
Another Pulsar derivative was introduced to Japan, called the Nissan Langley, from 1980, and was introduced as a "mini Skyline", and exclusive to Nissan Prince Shop. The Japanese-market Langley assumed duties of the first generation, Sunny-based coupe called the Nissan Silvia when the second generation Silvia was upgraded to the larger Nissan Violet platform; both the Silvia and the Langley remained exclusive to Nissan Prince Store locations. The Langley was given its name from Samuel Pierpont Langley the inventor of the bolometer, a device used to measure electromagnetic radiation from the Sun, and was well regarded for his work in solar physics. Because of its sporting intentions, the Langley was equipped with an independent suspension at all four wheels, using MacPherson struts in the front, and a trailing arm coil suspension for the rear. The engine choices consisted of the A14 and E15 series engines with multi-point fuel injection on top level trim packages, but only in a three-door hatchback.
The N10 series Pulsar was available as a three- or five-door hatchback, a short-lived four-door fastback sedan, a five-door van or station wagon, and a three-door fastback-styled coupé with a wraparound rear window introduced at the end of 1978. The van was first released in November 1978, while the export-only wagon models first appeared in early 1979. Originally the lineup consisted only of the four-door sedan which utilized the same body profile as the later hatchback models; in August 1978 the coupé and three-door hatchback models were added, along with a fuel injected version of the 1.4-liter engine. One year later a five-door hatchback appeared, replacing the four-door sedan which was immediately discontinued.thumb|left|1981-1982 Datsun Pulsar TL 5-door (Australia)Most markets outside Japan did not receive all versions: for instance, the three- and five-door hatchbacks and the coupé were the only models to be offered in the US. Most markets never got any fuel injected versions. The 1.0-liter A10 (later also updated to an OHC engine, called E10) was never available in Japan, mainly restricted to markets where tax codes made smaller engines necessary. An interesting anomaly of the French automotive taxation system is that while the A12A-engined Cherry sedans were considered as "6 CVs", the coupés with the same engine were markedly cheaper to own as they were classified as "5 CVs".
A late-term facelift in March 1981 brought Nissan's newly developed OHC E-series engines in for the last twelve months of production, which also introduced the more conventional (and industry standard) drivetrain with an end-on transmission with unequal length driveshafts - the A-Series engine cars continued to use the transmission-in-sump layout that had been used in the previous generation Cherry models. The facelift involved a new grille and rectangular headlamps. The updated 1982 model Pulsar five-door hatchback with E-series engine was assembled in New Zealand at Nissan's new factory-owned assembly plant in Wiri, Auckland. Only one well-equipped model was offered, with a five-speed manual gearbox.
In 1982 "Nissan" badges began to appear on the cars, due to Nissan phasing out the Datsun name at that time for its international markets. Production of the N10 series ceased in mid-1982, to be replaced by the all-new N12 Cherry/Pulsar.
In Japan the five-door van received the VN10 chassis code when shown in November 1978, but was then re-released in August 1979 in a version which met the 1979 commercial vehicle emissions standards — this model was designated VN11. While domestic market passenger models only received the slightly larger A12A engine, the vans and many export markets retained the smaller A12 engine (and the option of the larger A14) as also used in the preceding Cherry F-II. The van was unusual in the Japanese market for the period in being front-wheel drive; Nissan made the most of this and gave it a special rear suspension to allow for a very low loading floor. To further lower the rear opening the rear bumper was also extremely slim. This generation Pulsar van also provided the basis for the first generation of the Prairie people carrier. This van bodywork, with more comfortable fittings, was also used for the wagon model as sold in export markets. After the March 1981 facelift, the van also received the updated E13 and E15 OHC engines and now carried the VUN10 and VMN10 chassis codes. The three-door panel van model seems to have only been sold in the export.
Datsun 310
In North America the N10 Pulsar was originally sold only with the largest, 1.4-liter engine and only with four- or five-speed manual transmissions. Called the Datsun 310, in Canada it was also available with Pulsar striping on the rear quarters. Equipment levels were Deluxe or GX, and originally only the three-door hatchback or hatchback coupé bodywork were available. Only the three-door (called a "two-door sedan hatchback" in period materials) was ever available in Deluxe trim, with the GX being optional and all other bodystyles only sold in GX trim. A four-speed manual was installed in all sedans, while the GX Coupé received a five-speed unit. The three-door GX was unusual in receiving manual, remotely controlled (from the center console, behind the parking brake) rear side windows. A five-door hatchback ("sedan hatchback") model was added to the line during the 1980 model year, only in GX trim.
For 1981 the Pulsar received a facelift in North America, with a sloping, horizontal bar grille and rectangular headlights in place of the previous round units. A larger 1.5-liter engine replaced the earlier 1.4-liter unit, although in desmogged form it only produced . This generation Pulsar hatchback, three-door and five-door, was sold in North America only for model year 1983. The US-market Pulsar hatchbacks were equipped with the same, 1.6-litre E16S engine as the Pulsar NX coupé, producing at 5,200 rpm. The engine was equipped with a two-barrel carburetor and an oxidizing catalytic converter - California market cars received a three-way catalytic converter with no change to power or torque figures. A five-speed manual or a three-speed automatic were available in the United States.
Some unusual options were carried over from the previous generation, such as having the rear locks (on four-door models) remote operated by cable from the front seat. The rear child locks could also be controlled with a slider mounted beneath the driver's seat.
<gallery widths=200 heights=140>
1983 Nissan Pulsar (N12) GL sedan (2007-08-25) 02.jpg|1983–1984 Nissan Pulsar GL sedan (Australia)
1984-1986 Holden LB Astra SLE hatchback 02.jpg|Holden Astra (LB/LC) 5-door (Australia)
1983NissanPulsarUSA.jpg|In the United States, the Pulsar hatchback was only sold for the 1983 model year
</gallery>
Asia
New Pulsar models were introduced in the Japanese home market with three- or five-door hatchback bodywork, as well as the Pulsar EXA two-door coupé. In June a four-door sedan arrived as well. Most Pulsars sold had flush-fitting, aerodynamic rectangular headlights, but the lowest-spec cars received smaller rectangular units set deeper within the grille surround. There was no van model of the N12 Pulsar; instead, Nissan Cherry stores sold a version of the B11-series AD Van as the "Pulsar AD." In May 1983 the 1.7-liter CD17 diesel and a turbocharged petrol model were introduced. At the same time, a door mirror was fitted to some models rather than the traditional fender-mounted unit. The law had been changed only two months earlier, allowing for such fitment, and the Pulsar was the first Japanese car to take advantage of the change. The lowest-spec models, like the Pulsar TC, continued to use fender mirrors until the end of N12 production.
The series was facelifted at the end of March 1984, with wider and slimmer headlights. There were no longer two types of headlamps available. This is also when the Pulsar Milano trim level was introduced. This was a three-door hatchback with a more European and Italianate flair - while Alfa Romeo were not involved in its development, calling the model by the name of Alfa Romeo's hometown was a nod at the collaboration. In May 1985 the turbocharger was changed to a water-cooled design.
The Nissan Langley, in its second generation, was a Pulsar sold at Nissan Prince Store locations next to the Skyline, and shared many styling influences from the Skyline. The market acceptance of the Langley inspired Nissan to sell a second badge engineered version at Nissan Store as the Nissan Liberta Villa. This model partially replaced the larger Nissan Stanza clone called the Nissan Violet Liberta. The Liberta Villa was only available as a sedan, offered as a smaller companion to the Nissan Leopard (itself a Skyline clone). The top trim package was the SSS turbo with the E15ET engine, and the top two trim packages offered multi-port fuel injection with the base model offering a carburetor—all with the 1.5-liter petrol engine. As with the Pulsar and the Langley, the CD17 diesel engine was also offered on the Liberta Villa.
In Singapore the Pulsar was clearly defined as a class below the Sunny (even though a Pulsar sedan is longer than a Sunny and sits on a longer wheelbase). While the Sunny could be had with 1.3 or 1.5-liter engines, the Pulsar was only available with the 1-litre E10 engine. It was also fitted with the small recessed lights used for the lowest-cost models. In Singaporean specifications, the E10 engine produces DIN and was also available together with air conditioning.
<gallery widths=200 heights=140>
N12 Liberta Villa Turbo.jpg|1986 Nissan Liberta Villa SSS sedan (Japan)
Nissan Langley N12.jpg|Nissan Langley (N12) 5-door hatchback (Malaysia)
</gallery>
Australasia
The Australian market Pulsar N12 series arrived in October 1982. Offered as a five-door hatchback, 1.3-liter TC and 1.5-liter TS specifications featured. These early cars were manufactured in Japan. May 1983 saw the debut of an update to the Australian range. It was only available with a five-speed manual. The ET also had alloy wheels, a modified suspension and various aerodynamic improvements. The engine was imported fully built from Japan, which placed a limit on how many ETs could be built without falling afoul of laws on local content.
The next update came in August 1984 To differentiate the Pulsar, Nissan Australia applied the upmarket Japanese market Langley body details for its facelift. The Australian-built Pulsar ET was also exported to New Zealand, beginning in 1985 - these were the first fully built up cars to be exported by Nissan Australia.
The final Australian N12 update arrived in April 1986 prior to the 1987 N13 introduction. The revisions brought further trim changes, tweaks to the five-speed manual transmission, new colours, a new entry-level DX model, a change from GX to GXE, and the introduction of a larger displacement 1.6-liter engine tuned for unleaded petrol replacing the 1.3- and 1.5-liter leaded units used previously. The ET model also saw its 1.5-liter turbocharged engine updated for unleaded fuel.
The N12 was assembled in New Zealand at Nissan NZ's plant in Wiri South Auckland from 1982, and facelifted in 1984 when the main change was a switch to the now compulsory laminated windscreen. This generation was offered in both three and five door hatchback form with both 1.3- and 1.5-liter Nissan E-series engines shared with the also locally assembled Sunny sedan (NZ did not import the equivalent Pulsar sedan). The Holden Astra badged variant was not sold in New Zealand. The EXA Coupé was a limited official Nissan import new but thousands more Japanese market specification models arrived in the later 1980s and early 1990s when the NZ market was opened up to used imports.
Europe
The European market Cherrys were available with engines ranging from a 1.0-liter, petrol unit via a 1270 cc 60 PS, a 1488 cc 70 PS, up to the turbocharged 1.5-liter E15ET and also included the diesel CD17. The 1.7-liter diesel option was first introduced in early 1983; this was the first Cherry diesel. Only a small "diesel" badge on the bootlid betrayed the engine option. To accommodate the extra over the front axle, the diesel received stronger front springs and a model-specific, slightly larger, single-spoke steering wheel to counteract what would have otherwise been a heavier steering.
The Cherry Turbo was an attempt at breaking into the then very popular GTi category, but being a somewhat half-hearted effort it did not have much of an impact in the marketplace. The Turbo sat on comparatively skinny Dunlop tires and had few changes aside from its many stickers and the turbocharger. Period tests complained about peaky power delivery (and the same long gear ratios as for the regular Cherry), torque steer, and a harsh ride. The Pulsar/Cherry underwent a light facelift in July 1984.
This model was also built in Italy by Alfa Romeo as the Arna (named after the joint venture which created it, Alfa Romeo Nissan Autoveicoli), using Alfa Romeo boxer engines. Confusingly, the Italian models were also sold in the United Kingdom and Spain as the "Nissan Cherry Europe". At Alfa Romeo, the Arna was meant to replace lesser versions of the popular Alfasud, but the Arna never had the Italian car's appeal. The Cherry Europe also failed in its "home" market (Europe), as it lacked the build quality and reliability of its Japanese built twin car.