The MD2 Message-Digest Algorithm is an obsolete cryptographic hash function developed by Ronald Rivest in 1989.

Nevertheless, , it remained in use in public key infrastructures as part of certificates generated with MD2 and RSA.

Description

The 128-bit hash value of any message is formed by padding it to a multiple of the block length (128 bits or 16 bytes) and adding a 16-byte checksum to it. For the actual calculation, a 48-byte auxiliary block and a 256-byte S-table are used. The constants were generated by shuffling the integers 0 through 255 using a variant of Durstenfeld's algorithm with a pseudorandom number generator based on decimal digits of (pi) (see nothing up my sleeve number). The algorithm runs through a loop where it permutes each byte in the auxiliary block 18 times for every 16 input bytes processed. Once all of the blocks of the (lengthened) message have been processed, the first partial block of the auxiliary block becomes the hash value of the message.

The S-table values in hex are:

{ 0x29, 0x2E, 0x43, 0xC9, 0xA2, 0xD8, 0x7C, 0x01, 0x3D, 0x36, 0x54, 0xA1, 0xEC, 0xF0, 0x06, 0x13,

0x62, 0xA7, 0x05, 0xF3, 0xC0, 0xC7, 0x73, 0x8C, 0x98, 0x93, 0x2B, 0xD9, 0xBC, 0x4C, 0x82, 0xCA,

0x1E, 0x9B, 0x57, 0x3C, 0xFD, 0xD4, 0xE0, 0x16, 0x67, 0x42, 0x6F, 0x18, 0x8A, 0x17, 0xE5, 0x12,

0xBE, 0x4E, 0xC4, 0xD6, 0xDA, 0x9E, 0xDE, 0x49, 0xA0, 0xFB, 0xF5, 0x8E, 0xBB, 0x2F, 0xEE, 0x7A,

0xA9, 0x68, 0x79, 0x91, 0x15, 0xB2, 0x07, 0x3F, 0x94, 0xC2, 0x10, 0x89, 0x0B, 0x22, 0x5F, 0x21,

0x80, 0x7F, 0x5D, 0x9A, 0x5A, 0x90, 0x32, 0x27, 0x35, 0x3E, 0xCC, 0xE7, 0xBF, 0xF7, 0x97, 0x03,

0xFF, 0x19, 0x30, 0xB3, 0x48, 0xA5, 0xB5, 0xD1, 0xD7, 0x5E, 0x92, 0x2A, 0xAC, 0x56, 0xAA, 0xC6,

0x4F, 0xB8, 0x38, 0xD2, 0x96, 0xA4, 0x7D, 0xB6, 0x76, 0xFC, 0x6B, 0xE2, 0x9C, 0x74, 0x04, 0xF1,

0x45, 0x9D, 0x70, 0x59, 0x64, 0x71, 0x87, 0x20, 0x86, 0x5B, 0xCF, 0x65, 0xE6, 0x2D, 0xA8, 0x02,

0x1B, 0x60, 0x25, 0xAD, 0xAE, 0xB0, 0xB9, 0xF6, 0x1C, 0x46, 0x61, 0x69, 0x34, 0x40, 0x7E, 0x0F,

0x55, 0x47, 0xA3, 0x23, 0xDD, 0x51, 0xAF, 0x3A, 0xC3, 0x5C, 0xF9, 0xCE, 0xBA, 0xC5, 0xEA, 0x26,

0x2C, 0x53, 0x0D, 0x6E, 0x85, 0x28, 0x84, 0x09, 0xD3, 0xDF, 0xCD, 0xF4, 0x41, 0x81, 0x4D, 0x52,

0x6A, 0xDC, 0x37, 0xC8, 0x6C, 0xC1, 0xAB, 0xFA, 0x24, 0xE1, 0x7B, 0x08, 0x0C, 0xBD, 0xB1, 0x4A,

0x78, 0x88, 0x95, 0x8B, 0xE3, 0x63, 0xE8, 0x6D, 0xE9, 0xCB, 0xD5, 0xFE, 0x3B, 0x00, 0x1D, 0x39,

0xF2, 0xEF, 0xB7, 0x0E, 0x66, 0x58, 0xD0, 0xE4, 0xA6, 0x77, 0x72, 0xF8, 0xEB, 0x75, 0x4B, 0x0A,

0x31, 0x44, 0x50, 0xB4, 0x8F, 0xED, 0x1F, 0x1A, 0xDB, 0x99, 0x8D, 0x33, 0x9F, 0x11, 0x83, 0x14 }

MD2 hashes

The 128-bit (16-byte) MD2 hashes (also termed message digests) are typically represented as 32-digit hexadecimal numbers. The following demonstrates a 43-byte ASCII input and the corresponding MD2 hash:

MD2("The quick brown fox jumps over the lazy og") =

03d85a0d629d2c442e987525319fc471

As the result of the avalanche effect in MD2, even a small change in the input message will (with overwhelming probability) result in a completely different hash. For example, changing the letter to in the message results in:

MD2("The quick brown fox jumps over the lazy og") =

6b890c9292668cdbbfda00a4ebf31f05

The hash of the zero-length string is:

MD2("") =

8350e5a3e24c153df2275c9f80692773

Security

Rogier and Chauvaud presented in 1995

See also

  • Hash function security summary
  • Comparison of cryptographic hash functions
  • MD4
  • MD5
  • MD6
  • SHA-1

References

</references>

Further reading