thumb|upright=1.5|alt=See caption|A [[thermogram compares the heat radiation of the windows and walls of two buildings: a sustainable, low-energy passive house (right) and a conventional house]]

A low-energy house is characterized by an energy-efficient design and technical features which enable it to provide high living standards and comfort with low energy consumption and carbon emissions. Traditional heating and active cooling systems are absent, or their use is secondary. Low-energy buildings may be viewed as examples of sustainable architecture. Low-energy houses often have active and passive solar building design and components, which reduce the house's energy consumption and minimally impact the resident's lifestyle. Throughout the world, companies and non-profit organizations provide guidelines and issue certifications to guarantee the energy performance of buildings and their processes and materials. Certifications include passive house, BBC—Bâtiment Basse Consommation—Effinergie (France), zero-carbon house (UK), and Minergie (Switzerland).

Buildings alone were responsible for 38% of all human Greenhouse gas emissions (GHG) as of 2008, with 20% attributed to residential buildings and 18% to commercial buildings. According to the Intergovernmental Panel on Climate Change (IPCC), buildings is the sector which presents the most cost effective opportunities for GHG reductions.

Background

During the 1970s, research on low-energy buildings was done in Denmark, Sweden, Germany, Canada, and the United States. The implementation of standardized low-energy building concepts has developed differently in each country.

Canada

In the late 1970s, the province of Saskatchewan contracted the Saskatchewan Research Council to design and build a passive solar house suitable for the extreme climate of the Canadian prairies, where winter temperatures can drop to negative 40 degrees Celsius (-40°F). The project resulted in the construction of the Saskatchewan Conservation House in Regina in 1977 by a team led by engineer Harold Orr. The project developed a heat recovery air exchanger (HRV), hot water recovery, and a blower-door apparatus to measure building air-tightness, techniques that became common in low-energy building in other parts of the world. Orr would go on to apply many of those techniques to retro-fitting existing buildings to improve energy efficiency.

Germany

Triggered in the 1970s by the first energy crisis and growing environmental awareness, energy conservation became increasingly important in Germany. In 1977, the country's first energy-related building standard was enacted. The German Passivhaus Institute introduced the first certified passive house in 1990. The annual heating requirement was introduced as an important parameter by the third German Thermal Insulation Ordinance (1995). In 2013, however, there was no clear legal requirement for a low-energy building standard in Germany. According to Maria Panagiotidou and Robert J. Fuller, definitions, policies and construction activity of zero-energy buildings must be clear. The European Union's Energy Performance Directive requires that beginning in 2021, only low-energy buildings may be built.

United Kingdom

Changes to national policies have occurred since May 2015 in the UK. One of the most significant has been the withdrawal of the Code for Sustainable Homes (CfSH) as a system for assessing and encouraging improvements in the environmental design of dwellings. This has abandoned the code's schematic which provided a framework of achievement levels and to which low-energy designers could aspire to meet or surpass. Although energy-conservation legislation still exists in the building regulations, there is a lack of suitable standards exceeding basic regulations. As a result, the Passive House Standard may expand its influence and impact on energy-efficient houses.

United States

Interest in low-energy buildings has increased in the United States, primarily due to rising energy prices, decreasing costs for onsite renewable-energy systems, and increasing concern about climate change. California requires all new residential construction to be zero net energy by 2020. These standards sometimes seek to limit the energy used for space heating, which is the largest energy consumer in many climate zones. Other energy uses may also be regulated. The history of passive solar building design provides an international view of one form of low-energy-building development and standards.

Europe

Standards for low-energy buildings in Europe have proceeded differently in each country, and there is no common certification or legislation for low-energy buildings valid in all EU member states. As a movement towards reducing energy use and emissions, a common legislation concerning buildings’ energy performance, the Energy Performance of Buildings Directive (EPBD) was published in 2002 and became effective in January 2003.

Norway

In NS 3700, the draft official standard, low-energy buildings are defined. About the buildings' energy performance, two alternatives for rating their primary energy use are under discussion:

  • A limit on a building's annual CO<sub>2</sub> emissions, calculated by multiplying the annual supplied energy by a CO<sub>2</sub> factor
  • A percentage of its heating demand must be met with renewable energy.

Denmark

Low-energy houses are defined in the National Building Regulation Building Regulations 08, and are divided into two classes. They are regulated in the regulations' chapter 7.2.4: Low-energy.

Germany

Low-energy houses certified by RAL-GZ 965 have 30 percent less heat losses than regulated in the EnEV, a national building code. Other criteria affect insulation, air tightness and ventilation. Low-energy buildings may be certified by RAL-GZ 965 for planning or construction.

Switzerland

Low-energy buildings may receive the Minergie certification, a "quality label for new and refurbished buildings". The Minergie standard requires that buildings do not exceed 75 percent of average building energy consumption and fossil-fuel consumption must not exceed 50 percent of the average.

North America

The European Union directive has clarified low-energy houses in Europe, and a large portion of the discussions on zero-energy building in North America derives from the U.S. National Renewable Energy Laboratory (NREL).

The Energy Star program is the largest certifier of low-energy homes and consumer products in the U.S. Although certified Energy Star homes use at least 15 percent less energy than standard new homes built in accordance with the International Residential Code, they typically achieve a 20- to 30-percent savings. The United States Department of Energy introduced a program in 2008 to distribute zero-energy housing across the country.

Canadian builders may use a range of standards, labels, and certification programs to demonstrate a high level of energy performance in a given project. These include:

  • Net Zero Home and Net Zero Ready Home certifications, administered by the Canadian Home Builders' Association
  • Built Green labels, administered by Built Green Canada
  • Energy Star for Homes, administered by Natural Resources Canada
  • The Canadian Passive House standard, administered by the Canadian Passive House Institute

In British Columbia the above programs align with the BC Energy Step Code, a provincial regulation to incentivize (or require) a level of energy efficiency in new construction beyond the base building code. The code was designed as a technical road map to help the province reach its target of all new net-zero-energy-ready buildings by 2032.

Obstacles and issues

Energy efficient housing affects indoor air quality. Airtight houses will trap pollutants inside them, whether produced indoors or outdoors, and lead to an increase in human exposure and potential health issues.

Energy-efficient design often relies on new technologies and techniques. These may create technical obstacles in addition to social, cultural, and economic non-technical obstacles. The best low-energy designs offer occupants a better environment and more stable, controlled thermal comfort in addition to reduced energy costs.

GHG emissions associated with buildings construction are mainly coming from:

  1. Materials manufacturing (e.g., concrete)
  2. Materials transport
  3. Demolition wastes transport
  4. Demolition wastes treatment

The construction, renovation, and deconstruction of a typical building is on average responsible for the emissions of 1,0001,500&nbsp;kg CO<sub>2</sub>e/m<sup>2</sup> (around 500&nbsp;kg CO<sub>2</sub>e/m<sup>2</sup> for construction only).

Strategies adopted by low-carbon buildings to reduce GHG emissions during construction include:

  1. Reduce quantity of materials used
  2. Select materials with low emissions factors associated (e.g., recycled materials)
  3. Select materials suppliers as close as possible to the construction.
  4. Divert demolition wastes to recycling instead of landfills or incineration

Energy efficiency

Reduction of energy consumption is more environmentally and financially advantageous than increasing onsite production to reach a low-energy goal. The less a home consumes, the smaller renewable-energy system it requires to reach net zero. Energy efficiency should always be the primary design strategy of a low-energy house. Other techniques to reduce excess solar heat include brise-soleils, trees, attached pergolas with vines, vertical gardens, and green roofs.

Although low-energy houses can be constructed from dense or lightweight materials, internal thermal mass is normally incorporated to reduce summer peak temperatures, maintain stable winter temperatures, and prevent possible overheating in spring or autumn before the higher sun angle "shades" midday wall exposure and window penetration. Exterior wall color (when the surface allows choice) reflection or absorption depends on the predominant year-round outdoor temperature. The use of deciduous trees and wall trellised (or self-attaching) vines can assist in temperate climates.

Lighting and electrical appliances

To minimize total primary energy consumption, passive and active daylighting are the first daytime solutions to employ. For low-light days, non-daylight spaces and nighttime, sustainable lighting design with low-energy sources (such as standard-voltage compact fluorescent lamps and solid-state lighting with LED lamps, OLEDs and polymer light-emitting diodes and low-voltage incandescent light bulbs, compact metal halide, xenon and halogen lamps) can be used.

Solar-powered exterior security and landscape lighting, with solar cells on each fixture or connecting to a central solar panel, are available for gardens and outdoor needs. Low-voltage systems can be used for more controlled (or independent) illumination, using less electricity than conventional fixtures and lamps. Timers, motion detection and daylighting operation sensors further reduce energy consumption and light pollution.

Home appliances meeting independent energy-efficiency testing and receiving Ecolabel certification marks for reduced electrical and natural-gas consumption and product-manufacturing carbon emission labels are preferred for low-energy houses. Energy Star and EKOenergy are other certification marks.

See also

Buildings

  • Zero-energy building
  • Self-sufficient homes
  • PlusEnergy buildings
  • Energy-plus buildings
  • Green building
  • Energy audit
  • Yakhchāl

Air and temperature

  • Renewable heat
  • Solar thermal collector
  • Solar air heat
  • Solar air conditioning
  • Thermal conductivity
  • Superinsulation
  • Quadruple glazing

Solar

  • Passive solar building design
  • History of passive solar building design
  • Energy-saving lighting
  • Solar access
  • List of pioneering solar buildings
  • Sustainability
  • Sustainable energy
  • Green building
  • Sustainable refurbishment

Energy rating standards

  • House Energy Rating (Australia)
  • Home energy rating (United States)
  • EnerGuide (Canada)
  • National Home Energy Rating (United Kingdom)
  • LEED - (Leadership in Energy and Environmental Design)
  • Carbon emission label
  • Low-carbon economy

References

Further reading

  • Voss, Karsten and Musall, Eike. Net zero energy buildings - International projects of carbon neutrality in buildings. 2nd edition, November 2012, Institut für internationale Architektur-Dokumentation GmbH & Co. KG, München, .
  • Raad Z. Homod, Intelligent HVAC Control for High Energy Efficiency in Buildings. Lambert Academic Publishing (2014), .
  • Per Krusche, Dirk Althaus, Ingo Gabriel, Maria Weig-Krusche: Ökologisches Bauen, Bauverlag Wiesbaden and Berlin, (1982), ISBN 3-7625-1412-7
  • Peter Steiger, Conrad U. Brunner, et al.: PLENAR - Planung, Energie, Architektur, Niggli-Verlag, Teufen (1975), ISBN 9978-3-7212-0<nowiki/>078-2
  • bigEE - Your guide to energy efficiency in buildings
  • IEA research program "Net Zero Energy Solar Buildings"
  • IEA Energy Conservation in Buildings and Community Systems Programme.
  • Common Fire Foundation overview of green building and information on the net-zero-energy Greenest Building in the Eastern US
  • Article on Low-Energy Housing

Examples

  • World Map of international known Net Zero Energy Buildings
  • Building of low energy houses with Insulating Concrete Forms