European Standards (abbreviated EN, from the German name ("European standard")) are technical standards drafted and maintained by CEN (European Committee for Standardization), CENELEC (European Committee for Electrotechnical Standardization) and ETSI (European Telecommunications Standards Institute).

EN 1–999

  • EN 1: Flued oil stoves with vaporizing burners
  • EN 2: Classification of fires
  • EN 3: Portable fire extinguishers
  • EN 14: Dimensions of bed blankets
  • EN 19: Industrial valves – Marking of metallic valves
  • EN 20: Wood preservatives.
  • EN 26: Gas-fired instantaneous water heaters for the production of domestic hot water
  • EN 40: Lighting columns
  • EN 40-1: Part 1: Definitions and terms
  • EN 40-2: Part 2: General requirements and dimensions
  • EN 40-3-1: Part 3-1: Design and verification - Specification for characteristic loads
  • EN 40-3-2: Part 3-2: Design and verification - Verification by testing
  • EN 40-3-3: Part 3-3: Design and verification - Verification by calculation
  • EN 40-4: Part 4: Requirements for reinforced and prestressed concrete lighting columns
  • EN 40-5: Part 5: Requirements for steel lighting columns
  • EN 40-6: Part 6: Requirements for aluminium lighting columns
  • EN 40-7: Part 7: Requirements for fibre reinforced polymer composite lighting columns
  • EN 54: Fire detection and fire alarm systems
  • EN 71: Safety of toys
  • EN 81: Safety of lifts and escalators
  • EN 115: Safety of escalators & Moving walks
  • EN 131: Ladders
  • EN 136: Respiratory protective devices – Full-face masks – Requirements, testing and marking
  • EN 137: Respiratory protective devices – Self-contained open-circuit compressed air breathing apparatus with full face mask – Requirements, testing, marking
  • EN 1337: Structural bearings
  • EN 1384: Helmets for equestrian activities
  • EN 10088-1 Stainless steels - Part 1: List of stainless steels
  • EN 10088-2 Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
  • EN 10088-3 Stainless steels - Part 3: Stainless steels - Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
  • EN 10088-4 Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes;
  • EN 10149: Hot rolled flat products made of high yield strength steels for cold forming.
  • EN 10149-1: General technical delivery conditions
  • EN 10149-2: Technical delivery conditions for thermomechanically rolled steels
  • EN 10149-3: Technical delivery conditions for normalized or normalized rolled steels
  • EN 10204: Metallic products - Types of inspection documents
  • EN 10216: Seamless steel tubes for pressure purposes
  • EN 10216-1: Part 1: Non-alloy steel tubes with specified room temperature properties
  • EN 10216-2: Part 2: Non alloy and alloy steel tubes with specified elevated temperature properties
  • EN 10216-3: Part 3: Alloy fine grain steel tubes
  • EN 10216-4: Part 4: Non-alloy and alloy steel tubes with specified low temperature properties
  • EN 10216-5: Part 5: Stainless steel tubes
  • EN 10217: Welded steel tubes for pressure purposes
  • EN 10217-1: Part 1: Non-alloy steel tubes with specified room temperature properties
  • EN 10217-2: Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties
  • EN 10217-3: Part 3: Alloy fine grain steel tubes
  • EN 10217-4: Part 4: Electric welded non-alloy steel tubes with specified low temperature properties
  • EN 10217-7: Part 7: Welded stainless steel tubes for pressure purposes at low and elevated temperature environment
  • EN 10220: Seamless and welded steel tubes — Dimensions and masses per unit length
  • EN 10240: Internal and/or external protective coating for steel tubes - specification for hot dip galvanized coatings applied in automatic plants
  • EN 10270-1: Steel wire for mechanical springs - Part 1: Patented cold drawn unalloyed spring steel wire
  • EN 10270-2: Steel wire for mechanical springs - Part 2: Oil hardened and tempered spring steel wire
  • EN 10305: Steel tubes for precision applications — Technical delivery conditions
  • Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems
  • Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems

EN 12080, Railway applications — Axleboxes — Rolling bearings

  • EN 10357: Austenitic, austenitic-ferritic and ferritic longitudinally welded stainless steel tubes for the food and chemical industry
  • EN 10365: Hot rolled steel channels, I and H sections. Dimensions and masses
  • EN ISO 10819: Mechanical vibration and shock – Hand-arm vibration – Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand (ISO 10819:2013)
  • EN 12890: Patterns, pattern equipment and coreboxes for the production of sand molds and sand cores
  • EN 12896: Public Transport Reference Data Model
  • EN 12941: Respiratory protective devices – Powered filtering devices incorporating a loose fitting respiratory interface – Requirements, testing, marking
  • EN 13231: Railway applications - Track - Acceptance of works
  • EN 13231-1: Part 1: Works on ballasted track - Plain line, switches and crossings
  • EN 13231-2: Part 2: Acceptance of reprofiling rails in plain line, switches, crossings, and expansion devices
  • EN 13231-3: withdrawn, replaced by EN 13231-2
  • EN 13231-4: withdrawn, replaced by EN 13231-2
  • EN 13231-5: Part 5: Procedures for rail reprofiling in plain line, switches, crossings, and expansion devices
  • EN 13260: Railway applications — Wheelsets and bogies — Wheelsets — Product requirements
  • EN 13261: Railway applications — Wheelsets and bogies — Axles — Product requirements
  • EN 13262: Railway applications — Wheelsets and bogies — Wheels — Product requirements
  • EN 13277: Protective equipment for martial arts
  • EN ISO 14877: Protective clothing for abrasive blasting operations using granular abrasives (ISO 14877:2002)
  • EN 45502-1: Active implantable medical devices - Part 1: General requirements for safety, marking and information to be provided by the manufacturer
  • EN 45545: Railway applications. Fire protection on railway vehicles.
  • EN 45545-1: Railway applications. Fire protection on railway vehicles. General
  • EN 45545-2: Railway applications. Fire protection on railway vehicles. Requirements for fire behaviour of materials and components
  • EN 45545-3: Railway applications. Fire protection on railway vehicles. Fire resistance requirements for fire barriers
  • EN 45545-4: Railway applications. Fire protection on railway vehicles. Fire safety requirements for rolling stock design
  • EN 45545-5: Railway applications. Fire protection on railway vehicles. Fire safety requirements for electrical equipment including that of trolley buses, track guided buses and magnetic levitation vehicles
  • EN 45545-6: Railway applications. Fire protection on railway vehicles. Fire control and management systems
  • EN 45545-7: Railway applications. Fire protection on railway vehicles. Fire safety requirements for flammable liquid and flammable gas installations
  • EN 45554: General methods for the assessment of the ability to repair, reuse and upgrade energy-related products

EN 50000–59999 (CENELEC specific, non-IEC electrical standards)

  • EN 50022: 35 mm snap-on top-hat mounting rails for low-voltage switchgear (DIN rail)
  • EN 50075: Europlug
  • EN 50090: Home and Building Electronic Systems (KNX/EIB)
  • EN 50102: Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts
  • EN 50119: Railway applications - Fixed installations: Electric traction overhead contact lines for railways
  • EN 50121: Railway applications - Electromagnetic compatibility
  • EN 50121-1: Railway applications - Electromagnetic compatibility Part 1: General
  • EN 50121-2: Railway applications - Electromagnetic compatibility - Part 2 : emission of the whole railway system to the outside world
  • EN 50121-3-1: Railway applications - Electromagnetic compatibility - Part 3-1 : rolling stock - Train and complete vehicle
  • EN 50121-3-2: Railway applications - Electromagnetic compatibility - Part 3-2 : rolling stock - Apparatus
  • EN 50121-4: Railway applications - Electromagnetic compatibility - Part 4 : emission and immunity of the signaling and telecommunications apparatus
  • EN 50121-5: Railway applications - Electromagnetic compatibility - Part 5: Emission and immunity of fixed power supply installations and apparatus
  • EN 50122: Railway applications - Fixed installations
  • EN 50122-1: Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 1: Protective provisions against electric shock
  • EN 50122-2: Railway applications - Fixed installations - Part 2: Protective provisions against the effects of Stray currents caused by d.c. traction systems
  • EN 50122-3: Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 3: Mutual Interaction of a.c. and d.c. traction systems
  • EN 50123: Railway applications - Fixed installations - D.C. switchgear
  • EN 50124: Railway applications - Insulation coordination
  • EN 50125-1: Railway applications - Environmental conditions for equipment - Part 1: Rolling stock and on-board equipment
  • EN 50125-2: Railway applications - Environmental conditions for equipment - Part 2: Fixed electrical installations
  • EN 50125-3: Railway applications - Environmental conditions for equipment - Part 3: Equipment for signaling and telecommunications
  • EN 50126: Railway applications - The specification and demonstration of reliability, availability, maintainability and safety (RAMS)
  • EN 50128: Railway applications - Communication, signalling and processing systems - Software for railway control and protection systems
  • EN 50129: Railway applications - Communication, signalling and processing systems – Safety related electronic systems for signalling
  • EN 50130: Alarm systems - Electromagnetic compatibility and Environmental test methods
  • EN 50131: Alarm systems - Intrusion and hold-up systems
  • EN 50136: Alarm systems - Alarm transmission systems
  • EN 50153: Railway applications - Rolling stock - Protective provisions relating to electrical hazards
  • EN 50155: Railway applications - Electronic equipment used on rolling stock
  • EN 50157: Domestic and Similar Electronic Equipment Interconnection Requirements (Part1 = AV.link)
  • EN 50159: Railway applications - Communication, signaling and processing systems - Safety-related communication in transmission systems
  • EN 50163: Railway applications - Supply voltages of traction systems
  • EN 50178: Electronic equipment for use in power installations
  • EN 50207: Railway applications - Electronic power converters for rolling stock
  • EN 50262: Metric cable glands
  • EN 50267: Corrosive Gases
  • EN 50272-1: Standards for Safety requirements for secondary batteries and battery installations - Part 1 General safety information
  • EN 50272-2: Standards for Safety requirements for secondary batteries and battery installations - Part 2 Stationary batteries
  • EN 50522: Earthing of power installations exceeding 1 kV a.c.
  • EN 50308: Wind Turbines - Protective Measures - Requirements for design, operation and maintenance
  • EN 50321-1: Live working – Footwear for electrical protection – Insulating footwear and overboots