Insect collecting

thumb|upright=1.35|[[Beetle collection at the Melbourne Museum, Australia]]

Insect collecting refers to the collection of insects and other arthropods for scientific study or as a hobby. Most insects are small and the majority cannot be identified without the examination of minute morphological characters, so entomologists often make and maintain insect collections. Very large collections are preserved in natural history museums or universities where they are maintained and studied by specialists. Many college courses require students to form small collections. There are also amateur entomologists and collectors who keep collections.

Historically, insect collecting has been widespread and was in the Victorian age a very popular educational hobby. Insect collecting has left traces in European cultural history, literature and songs, e.g., Georges Brassens's La chasse aux papillons (The Hunt for Butterflies). The practice is particularly common among Japanese youths.

Capture and kill techniques

thumb|Entomologist Clare Butcher collecting with a net and an [[Aspirator (entomology)|aspirator.]]

alt=An old black and white drawing of seven men in a wooded area, catching insects in various ways|thumb|1877 illustration showing a variety of collection techniques

alt=A large circular machine sitting on an outdoor table|thumb|A [[Robinson light trap for collecting moths]]

Insects may be passively caught using traps such as funnels, pitfall traps, bottle traps, malaise traps, or flight interception traps, some of which are baited with small bits of sweet foods (such as honey). Entomologists collecting nocturnal insects (especially moths) during faunistic survey studies might utilize ultraviolet light traps such as the Robinson trap. Aspirators, sometimes called "pooters", suck up insects too small or delicate to handle with fingers.

Active capture of insects often involves using nets. Aerial insect nets are used to collect flying insects. The bag of a butterfly net is generally constructed from a lightweight mesh to minimize damage to delicate butterfly wings. Sweep nets are more rugged, and used to collect insects from grass and brush. A sweep net is swept back and forth through vegetation quickly turning the opening from side to side and following a shallow figure eight pattern. The collector walks forward while sweeping, and the net is moved through plants and grasses with force. Sweeping continues for some distance and then the net is flipped over, with the bag hanging over the rim, trapping the insects until they can be removed. Other types of nets used for collecting insects include beating nets and aquatic nets. Leaf litter sieves are used by coleopterists and to collect larvae.

Once collected, insects must be killed before they damage themselves trying to escape. Killing jars are used on hard-bodied insects. Soft-bodied insects, such as those in the larval stage, are generally fixed in a vial containing an ethanol and water solution.

Storage and curation

thumb|Equipment for preparation

thumb|Insect pinning label order diagram

There are several different preservation methods that are used; some of which include: dried preservation (pinning), liquid preservation, or slide mounts. Another (now mostly historical) approach is caterpillar inflation, where the innards were removed and the skin dried. Pinning is by far the most common form of insect preservation. The pin should sit with 1/4 of the pin above the insect as to allow enough room for labels to be readable underneath.

When pinning insects with wings, it is important to display them properly: Lepidoptera wings should always be spread. When drying insects with wings such as butterflies, setting paper is used to position the wings.

Orthopteroids often have their left wings spread. In scientific collections, the insect's wings, legs, and antenna are tucked underneath it to conserve space.

When point-mounting small insects the insect is glued to a small piece of non acidic, triangle paper. When drying an insect the relaxed insect is spread out accordingly using pins on a foam block where it can dry and retain its positioning.

When labeling insects the labels are presented in this order top down: Locality, additional locality/voucher label/accession numbers, insect identification.

Insect pins

thumb|Part of a beetle collection. The insects are fixed in place by entomological pins which allow handling and which also pierce the data label

thumb|A hoverfly double-mounted with a minuten pin and a size 3 pin

Insect pins are used by entomologists for mounting insect specimens.

As an exception to this standard, there also are pins of size 7, extra-long and very strong pins for very large beetles; they are 52mm long and thicker than size 6 pins.

Direct pinning. Direct pinning is the insertion of an entomological pin directly through the thorax of a specimen. The insects are pinned vertically through the thorax with a suitably sized pin, but by convention they are not pinned on the midline, but to the right, so as to leave at least one side undamaged.
Point. A point is a triangular piece of white card. Specially designed point punches permit the production of large numbers of points of standard sizes as required. To use a point, a pin is inserted through the broad base of the triangle. To mount the specimen, a tiny amount of glue is placed on the tip and applied to the right side of the insect's thorax.

A beetle collection becomes a source of fascination for a mentally disturbed woman in Chapter XI of MacKinlay Kantor's Pulitzer Prize-winning novel Andersonville (1955).

References

Works cited

External links

Capture methods and techniques Intermediate level
Collecting and Preserving Insects and Mites: Tools and Techniques; PDF Comprehensive, detailed download. Advanced level.
How to make an insect collection; containing suggestions and hints designed to aid the beginning and less advanced collector (Wards Natural Science Establishment 1945)
Bug Analyze to identify any insect