The Glen Waverley line is a commuter railway line in the city of Melbourne, Victoria, Australia. Operated by Metro Trains Melbourne, it is the city's sixth shortest metropolitan railway line at . The line runs from Flinders Street station in central Melbourne to Glen Waverley station in the east, serving 20 stations including Burnley, Kooyong, East Malvern, and Jordanville. Trains on the Glen Waverley line run with two three-car formations of X'Trapolis 100 trainsets.
Sections of the Glen Waverley line opened as early as 1890, with the line fully extended to Glen Waverley in 1930. The line was built to connect Melbourne with the rural towns of Kooyong, East Malvern, Mount Waverley, and Glen Waverley, amongst others.
Since the 2010s, due to the heavily utilised infrastructure of the Glen Waverley line, significant improvements and upgrades have been made. Different packages of works have upgraded the corridor to replace sleepers, upgrade signalling technology, introduce new rolling stock, and remove 2 out of the 6 remaining level crossings. In 1890, part of what would become the Glen Waverley line opened from Burnley to Darling. At the same time in 1890, a line known as the Outer Circle line opened, running from Oakleigh station to Darling, continuing to Burnley with the line continuing north to Riversdale and beyond. The Outer Circle closed in sections between 1893 and 1897, with the Burnley to Waverley Road section of the line closing back to Darling in 1895. The electrification of the line allowed for the introduction of Swing Door electric multiple unit trains for the first time.
The introduction of power signalling on the line begun in 1919 with the section from Richmond to East Richmond, with the remainder of the line converted in stages from 1922 to 1964. In 1929, the Glen Waverley line began construction on an extension from Darling to East Malvern along the original track of the Outer Circle line. The Outer Circle line previously begun its curve south towards Waverley Road and Oakleigh. The Glen Waverley line continued east towards Holmesglen. On 6 February 1956, the Toorak Road level crossing between Kooyong and Tooronga stations was the first in Victoria to receive boom barriers, replacing hand operated gates.
New Comeng trains were introduced to the Melbourne railway system in 1981. Initially, along with the Glen Waverley line, they were only allowed to operate on the Alamein, Belgrave, Dandenong and Lilydale lines, due to the width of the trains (). Also in 1981, Glen Waverley line services commenced operations through the City Loop, after previously terminating at Flinders or Spencer Street stations. The commencement of operations involved the service stopping at three new stations—Parliament, Melbourne Central (then called Museum), and Flagstaff. The Loop follows La Trobe and Spring Streets along the northern and eastern edges of the Hoddle Grid. The Loop connects with Melbourne's two busiest stations, Flinders Street and Southern Cross, via the elevated Flinders Street Viaduct. These works coincided with the construction of the Monash Freeway which runs alongside the route for part of the journey. This was the first crossing to be removed by the project and was completed in 2016. With the removal of 2 level crossings along the corridor, only 4 crossings now remain on the Glen Waverley line.
In 2021, the metropolitan timetable underwent a major rewrite, resulting in all Glen Waverley line trains operating via the City Loop alongside Alamein, Belgrave, and Lilydale services.
In 2023, data from Public Transport Victoria found that the Glen Waverley line was the most on-time train service on the network. Commuters on the Craigieburn line faced the highest train delays, with 10.6% of services arriving late between March 2022 and February 2023.
Train services on the line are also subjected to maintenance and renewal works, usually on selected Fridays and Saturdays. Shuttle bus services are provided throughout the duration of works for affected commuters.
Stopping patterns
Legend – Station status
- ◼ Premium Station – Station staffed from first to last train
- ◻ Host Station – Usually staffed during morning peak, however this can vary for different stations on the network.
Legend – Stopping patterns<br>Some services do not operate via the City Loop
- ● – All trains stop
- ◐ – Some services do not stop
- ▼ – Only outbound trains stop
- | – Trains pass and do not stop
{| class="wikitable defaultcenter col1left"
! colspan="5" style="background:#;" |<span style="color:white;">Glen Waverley Services</span>
|+
!Station
!Zone
!Local
!AM Express
!PM Express
|-
|◼ || rowspan="13" | 1 || ●
|●|| ●
|-
|◼ || ▼
||| ●
|-
|◼ || ▼
||| ●
|-
|◼ || ▼
||| ●
|-
|◼ || ▼
||| ●
|-
|◼ || ●
|●|| ●
|-
| || ◐
|||
|-
|◼ || ●
|||
|-
| || ●
|||
|-
| || ●
|●||
|-
|◻ || ●
|||
|-
| || ●
|●||
|-
| || ●
|||
|-
|◼ || rowspan="3" | 1/2 || ●
||| ●
|-
|◼ || ●
||| ●
|-
|◻ || ●
|●|| ●
|-
| || rowspan="4" | 2 || ●
||| ●
|-
|◼ || ●
||| ●
|-
|◻ || ●
|●|| ●
|-
|◼ || ●
|◐|| ●
|}
Operators
The Glen Waverley line has had a total of 6 operators since its opening in 1888. The majority of operations throughout its history have been government run: from its first service in 1888 until the 1999 privatisation of Melbourne's rail network, four different government operators have run the line. These operators, Victorian Railways, the Metropolitan Transit Authority, the Public Transport Corporation and Hillside Trains have a combined operational length of 111 years. Hillside Trains was privatised in August 1999 and later rebranded Connex Melbourne. Metro Trains Melbourne, the current private operator, then took over the operations in 2009. Both private operators have had a combined operational period of years.
{| class="wikitable"
|+Past and present operators of the Glen Waverley line:
!Operator
!Assumed operations
!Ceased operations
!Length of operations
|-
|Victorian Railways
|1888
|1983
|95 years
|-
|Metropolitan Transit Authority
|1983
|1989
|6 years
|-
|Public Transport Corporation
|1989
|1998
|9 years
|-
|Hillside Trains (government operator)
|1998
|1999
|1 years
|-
|Connex Melbourne
|1999
|2009
|10 years
|-
|Metro Trains Melbourne
|2009
|incumbent
| years (ongoing)
|}
Route
The Glen Waverley line forms a mostly curved route from the Melbourne central business district to its terminus in Glen Waverley. The route is long and is predominantly doubled tracked. Between Flinders Street station and Richmond, the track is widened to 12 tracks, narrowing to 4 tracks between Richmond and Burnley before again narrowing to 2 tracks between Burnley and Glen Waverley. After departing from its terminus at Flinders Street, the Glen Waverley line traverses both flat and hilly country with few curves and fairly minimal earthworks for most of the line. The journey from Holmesglen to the terminus involves some of the steepest grades in Melbourne (1 in 30). Sections of the line have been elevated or lowered into a cutting to eliminate level crossings. However, a small number of level crossings are still present with no current plans to remove them.
The line follows the same alignment as the Alamein, Belgrave, and Lilydale lines with the four services splitting onto different routes at Burnley. The Glen Waverley line goes on its south eastern alignment, whereas the Alamein, Belgrave, and Lilydale lines take an eastern alignment towards their final destinations. The rail line goes through built-up suburbs towards its terminus in Glen Waverley.
{| class="wikitable"
!Station
!Accessibility
!Opened
!Terrain
!Train connections
!Other connections
|-
|Flinders Street
| rowspan="5" |Yes—step free access
|1854
|Lowered
|
|
|-
|Southern Cross
|1859
!Closed The trains were originally built between 2002 and 2004 as well as between 2009 and 2020 with a total of 212 three-car sets constructed. The trains are shared with 7 other metropolitan train lines and have been in service since 2003.
Alongside the passenger trains, Glen Waverley line tracks and equipment are maintained by a fleet of engineering trains. The four types of engineering trains are: the shunting train; designed for moving trains along non-electrified corridors and for transporting other maintenance locomotives, for track evaluation; designed for evaluating track and its condition, the overhead inspection train; designed for overhead wiring inspection, and the infrastructure evaluation carriage designed for general infrastructure evaluation. Most of these trains are repurposed locomotives previously used by V/Line, Metro Trains, and the Southern Shorthaul Railroad. Half of stations on the corridor haven't been upgraded to meet these guidelines. These stations do feature ramps, however, they have a gradient greater than 1 in 14.
In April 2026, the final two stations without tactile boarding indicators were installed with Glen Iris and East Malvern Platform 1 being the last being installed with them.
Projects improving station accessibility have included the Level Crossing Removal Project, which involves station rebuilds and upgrades, and individual station upgrade projects. These works have made significant strides in improving network accessibility, with half of Glen Waverley line stations classed as fully accessible. Potential future station upgrade projects will continue to increase the number of fully accessible stations over time.
Signalling
The Glen Waverley line uses three position signalling which is widely used across the Melbourne train network. Three position signalling was first introduced on the line in 1919, with the final section of the line converted to the new type of signalling in 1964.
References
External links
- Glen Waverley line timetable
- Network map