thumb|0200/R was the first, displayed at Earls Court in 1960 and raced by [[Mike Salmon (racing driver)|Mike Salmon at 1962 24 Hours of Le Mans, here at Silverstone Classic in 2011.]]
thumb|0176/R has its original Italian red racing color and may be the most original as of 2023.
The Aston Martin DB4 GT Zagato is a grand tourer sports car designed by Zagato and produced between 1960 and 1963. Introduced in October 1960 at the London Motor Show, it was effectively a DB4 GT, lightened and improved by the Zagato factory in Italy, by Ercole Spada. Initially, the factory planned to produce 25 cars, but demand was not as strong as expected and production was reduced to 19.
Growing popularity of the original DB4 GT Zagato resulted in two subsequent waves of cars based on DB4s being rendered into "Zagatos" through the cooperation of Aston Martin and the Zagato works in Italy. They are known as "Sanction II" and "Sanction III" cars. Also, an unauthorised industry of modifying original DB4 GTs into "Zagato" replicas has arisen.
Specification
Engine
Although the specification of the engine was changed and upgraded throughout their racing history, the Aston Martin DB4 GT Zagato predominantly featured a 3.7-litre aluminium twin-spark straight 6-cylinder engine with a 9.7:1 compression ratio, higher than the DB4 GT engine.
The engine produced , and had a 0 to acceleration of 6.1 seconds and a top speed of approximately .
The most prominent DB4 GT Zagatos, affectionately known by the registration plates they share, 1 VEV and 2 VEV, were both raced under John Ogier's Essex Racing Stable, with assistance from the Aston Martin factory. Both the Zagatos raced in the 1961 24 Hours of Le Mans. However a repeat of the 1959 Le Mans victory was not to be, with both cars retiring. In July 1961 at a British Grand Prix Support race, the Zagato had its first victory with 2 VEV taking the last lap lead from a Jaguar E Type.
2 VEV crashed into a spa in 1962 and was rebuilt to the lightweight DP209 specification. After a car accident in 1993, the car was returned to the 1962 specification.
Chassis 0200 raced in the 1962 24 Hours of Le Mans; however, a blown piston after hours forced the car to retire.
Gallery
<gallery widths="220">
File:Side view of DB4GT Zagato coupe at silverstone 1VEV.JPG|Side view of DB4GT Zagato, 1 VEV
File:Rear view of Aston martin DB4GT Zagato (2VEV) at silverstone classic 2009.JPG|Rear view of DB4GT Zagato, 2 VEV
File:Aston Martin DB4 GT Zagato 1VEV.JPG|Front View of Aston Martin DB4GT Zagato, 1 VEV
File:Aston Martin DB4 GT Zagato.jpg
File:1961 Aston Martin DB4 GT Zagato - rvr.jpg|1961 Aston Martin DB4GT Zagato (rear)
</gallery>
Sanction II Zagatos
thumb|1988 Sanction II chassis 0196/R at Lime Rock in Connecticut, 2014
In 1988, four unutilised chassis numbers were put to use. With the approval of Aston Martin, four DB4 chassis were appropriately uprated to GT specifications. These chassis were then sent to Zagato's Milan workshop to be bodied like the originals, with a smaller oval grille, without the stock DB4 GT's rear tail fins, and with a smoothed out rear end. To familiarise the workforce with construction techniques of the 1960s, an original DB4 GT Zagato was sent there to be dismantled. These "Works-Approved Replicas" were known as the "Sanction II" cars. They were outwardly identical, but several changes were effected in the interest of better handling. Each of these cars sold for over $1,000,000. Differences from the "originals" include a larger engine capacity, increased from 3.7 to 4.2 litres, and a smaller wheel diameter, reduced from 16 inches to 15. The first of the four GT-specification rolling chassis was delivered to Zagato in January 1989 and the fourth in April of the same year, with all four being completed in July 1991. All four cars were then given their own chassis numbers, fitting for the 1960s.
Comparison of Sanction I to Sanction II
{| class="wikitable"
|-
!
! 1961 DB4GT Zagato
! 1988 DB4GT Zagato Sanction II
|-
| Chassis
| Platform based on DB4GT
| Platform based on DB4GT/0181/L
|-
| Wheelbase
|
|
|-
| Overall Length
|
|
|-
| Width
|
|
|-
| Height
|
|
|-
| Weight
|
|
|-
| Steering
| Rack and pinion
| Rack and pinion
|-
| Front Suspension
| IFS. wishbones, coil springs and telescopic dampers
Anti-roll bar
| As in 1961 car, but adjustable and thicker anti-roll bar
|-
| Rear Suspension
| Live axle on coil springs, located by trailing arms and Watt linkage
| As in 1961 car, but improved positioning, adjustable
|-
| Brakes
| Girling discs all round; no servo; separate master cylinders
| Discs all round; no servo; smaller rear calipers; altered brake balance; dual circuit
|-
| Wheels
| Borrani wire spoked with light alloy rims, 16 inch diameter, 5 inches wide
| Borrani wire spoked with light alloy rims, 15 inch diameter, 6 inches wide
|-
| Tyres
| 6.00 x 16 Avon Turbospeed Mark II
| 205/70 15 Goodyear Eagle NCT
|-
| Gearbox
| David Brown 4-speed manual, all-synchromesh
| David Brown 4-speed manual, all-synchromesh
|-
| Final Drive
| Hypoid bevel 3.31:1 Powr-lok limited-slip differential (LSD)
| Hypoid bevel 3.07:1 limited-slip differential (LSD)
|-
| Engine
| All-alloy straight six
Dual overhead camshaft (DOHC), two plugs per cylinder
| All alloy straight six
Dual overhead camshaft (DOHC), two plugs per cylinder
|-
| Capacity
| 3,670 cc
| 4,212 cc
|-
| Compression
| 9.7 to 1
| 9.82 to 1
|-
| Carburetors
| Three Weber 45 DCOE4
| Three Weber 50 DC01/SP
|-
| Max. power
| at 6,000 rpm
| at 6,000 rpm
|-
| Max. Torque
| at 5,400 rpm
| at 4,600 rpm
|-
| 0-
| 6.1 seconds
| 5.5 seconds
|-
| 0-
| 14.1 seconds
| 12.2 seconds
|-
| Max. Speed
|
|
|-
| Production Numbers
| 19
| 4
|-
| Chassis Numbers
| 0176–0191, 0193, 0199, 0200
| 0192, 0196, 0197, 0198
|-
| Price when new
| £5,470 (enough to buy a sizeable house at the time)
| In excess of $1,000,000
|}
Rolls-Royce Phantom in 1961 cost £7,000, in 1988 - $300,000.
Sanction III Zagatos
thumb|2000 model "Sanction III" chassis DB4/344/R on display in London, 2023. The Zagato factory still had two spare body shells left over after producing the Sanction II Zagatos. In 1992, Richard Williams approached the executive chairman of Aston Martin Lagonda Ltd, Walter Hayes, and sought approval for the spare body shells to be used to create two further "Sanction" cars. Walter Hayes gave his approval and the body shells along with two neglected Aston Martin DB4s (chassis No.s DB4/344/R and DB4/424/R) were completed to form a pair of Aston Martin DB4 GT Zagato "Sanction IIIs" in the year 2000. Instead of the original 3.7-litre straight-six, the recreations from Aston Martin Works use a 4.7-litre engine now making around 400 bhp. Aston Martin Works manufactured Continuation Series which captures the essence of Aston Martin's illustrious heritage.
Replicas
Various replica cars have been constructed based on DB4 and DB4 GT chassis. These replica (or recreation) cars bear a resemblance to the original Zagatos, but were not made by Zagato.
Notes
External links
- Aston Martin Heritage – Aston Martin website (Specification and photo)
- Fast-Autos – Specification and photos
- Supercars.net- Specification and photos
- jalopnik.com – Jalopnik Fantasy Garage